Forum quick links
Compliance with Appendix G ASHRAE
CS-2009 EAp2:Minimum Energy Performanceposted by Daniela Castro Salgado on
We have a 14 storie-152600sft building which we are interested in certifying, however, there are 2 problems: 1. The client does not want a water treatment plant. 2.
existing building modeling
CS-2009 EAp2:Minimum Energy Performanceposted by Alfonzo Collins on
I am modeling an existing building right now. The opaque envelope will be maintained (walls and roof) but the entire inside, all HVAC systems, and windows will be replaced.
the fan power of mechanical ventilation
CS-2009 EAp2:Minimum Energy Performanceposted by tiantian zhou on
Dear sir/madam, Per the Revised Section 1 4 Tables (Dec 2012), for Systems 9 and 10,the fan power=0.3*supply air flow rate(cfm).
Mechanical System by Future Tenant
CS-2009 EAp2:Minimum Energy Performanceposted by Andrew Chan on
We have an office core/shell project that we are considering for certification. The Owner may want to just design a small mechanical unit to service the restrooms and not much more.
Baseline Building System
CS-2009 EAp2:Minimum Energy Performanceposted by Dave Madsen on
I understand the selection of the base building systems (number of floors, sf, etc.) My question is, if the packaged RTU's are gas fired heat, but the fan powered VAV boxes (in the proposed design
Minimum Energy Performance Calculator Table
CS-2009 EAp2:Minimum Energy Performanceposted by Sivarajah Ragulakeethan on
Hi, We are working on a core and shell project. While filling minimum energy performance calculator table we met with some issues.
Baseline HVAC System for laboratory
CS-2009 EAp2:Minimum Energy Performanceposted by Yu Wang on
I am not clear about explanation from ASHRAE 90.1-2007 User’s Manual: 1. For laboratory spaces with a min.
Address extraction in simulation
CS-2009 EAp2:Minimum Energy Performanceposted by Isabel Santos on
Good afternoon, My company is developing a LEED Core and Shell evaluation of a warehouse that does not have any climatization systems (it is considered "Unconditioned" because it has a very low pe
District heating
CS-2009 EAp2:Minimum Energy Performanceposted by Ai Engineering on
I’m working on a Core & Shell project that has as Energy source a District Heating that use only heat recovery from combustion of municipal solid waste, I would like to know if the compliance p
Core and Shell Building with Tenant Improvement
CS-2009 EAp2:Minimum Energy Performanceposted by Curtis Clark on
We have been contracted to design a core and shell building for a large office building. We applied for Core and Shell for LEED 2009.