Hi, i'm working on an office building of 95,000sqm using a District Cooling System (DCS). I am using the HAP E20 software for simulation.

In relation to car park ventilation that will only operate in the event of high carbon monoxide i.e under normal circumstances will be off.

We are applying for a CS project which primarily will house research labs.

With reference to Service Hot Water should the following baseline inputs match the proposed; If not where can I find good guidnace on how these baseline inputs can be obtained.

According to Ashrae 90.1-2007 G3.1.1.d there should be a fan flow limitation for lab spaces in the baseline model during unoccupied hours. "For Lab spaces with a minimum of 5000 cfm of exhaust, use

After reading through the forum I have not found a response that specifically addresses a CS building who's future tenant finishout of office and warehouse space is yet to be designed but has the f

Is it recommended to include adjacent buildings to represent the shading effects in the proposed model. If so do I assume that I also include it in the baseline model also.

Hi! I have got a question regarding ASHRAE G3.1.2.10 "Exhaust Air Energy Recovery" which has to be applied to the baseline model. It says that at a minimum outdoor air supply of 70 % or greater of

high savings in auxillary power Hi we are modelling a 18 storey office block in Sap Paulo and getting some results we wanted to cross check, as we doing the energy model for the first time... Desc

Can someone direct me to any supporting information that explains the use of the Alternative Compliance Path for EA Credit 1 ACP?