Post a question or comment
Credit Filters
Measurement and Verification—Tenant Submetering
Filter by location
Forum
Topic
Replies
Recent

Tenant submetering

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Dina Ammar  on 

The developer's CS project consists of two large leasable spaces. One wing to be used for a department store, the other one to be used as furnished apartments.

1
Wed Mar 6, 2013, 6:09 pm

0% credit achievement rate?

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Graham Langton  on 

I'm seeing the credit achievement rate as 0% for this credit. Other achievement rates seem OK. Has nobody achieved this credit? Can this be verified?

1
Fri Oct 10, 2014, 2:23 pm

Plan Template?

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Melissa Wrolstad  on 

Is there an M+V plan template for this credit? There is a template for the M+V 5.1 credit. Thanks, Melissa

1
Fri Jul 12, 2013, 7:37 pm

Tenant Metering Questions

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Marina Andrade  on 

Hi, I'm working on a project that has many storage modules that will be occupied by tenants.

1
Thu Feb 13, 2014, 4:05 pm

Could you explain the plan just one more time?

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Charles Nepps  on 

I am still a bit unclear about the the M&V - Tenant Submetering documentation.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Dec 22, 2016, 4:12 pm

>75% M&V Template Requirement

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Martin Meehan  on 

Dear all, Our project recently received the comment below which appears to require an Option B or D 'template' to be submitted with our plan if a tenant is to take 75% or more of the building spa

8
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Fri Sep 30, 2016, 4:34 pm

Metering Requirements

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Ciaran McCabe  on 

Hi, I am working on a commercial project that consists of retail units on the ground floor and offices on the levels above.Currently the base build does not show and ten ant metering for the retail

3
Director
Passive Dynamics Sustainability Consultants
LEEDuser Basic Member
12 thumbs up
Wed Sep 28, 2016, 9:59 pm

Corrective Actions and Sub-metering

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Jatuwat Varodompun  on 

For the submetering, we can just provide the box that allow the tenant to install the meter, right?

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Wed Aug 31, 2016, 11:08 pm

Tenant is installing the entire energy systems at the building

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Michael Wahjudi  on 

Hi all, we have building where the tenant is installing the entire energy related system (ACMV, lighting, etc). The landlord only provide land and structural of the building.

3
Fri Aug 5, 2016, 10:43 pm

Single tenant in building pursuing Core & Shell

CS-2009 EAc5.2:Measurement and Verification—Tenant Submetering
posted by  Dave Hubka  on 

The building is pursuing C&S certification and has a perspective tenant that may fit out the entire space.

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Nov 5, 2015, 4:44 pm