Two issues: 1.

I am looking for a product to replace zinc anti corrosive aerosols. I have two questions: 1. Did I understand the LEED criteria correctly?

Good afternoon, does anyone know the VOC allowance for an acrylic enamel/lacquer in aerosol, non-flat? I do not know in which product type does this product falls into to take the VOC limit. Thank

Hi, we are working in a Cold dark shell, therefore interiors and fit outs will not have any finish.

We have three basements for parking and service areas like plant room etc. we are using epoxy coating on the floor and paints in plant room.

Hi I receive several MSDS for the coatings that will be used in our project and inside them, the VOC content is measured in Europe (EU) which are usually expressed in percentage % (w/w).

Hello, We are working on a project that is trying to achieve this credit, but I've encountered two problems: 1. Some of the cut sheets do not specify the VOC test methodology. 2.

HI... How is the way for document compliance for a local product made with plaster and Shintech PVC Resin wich is used before apply final paint. Thanks

Hi, my project plans to use 2 coating layers for steel frame structure of façade system, onsite and indoor.