Forum quick links
Is the M1 certified floorcovering sufficient to show compliance under the credit IEQ credit 4.3 flooring systems
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Gulafshan Bano on
I am in process of evaluating electrical room “floor covering” product (vinyle cover).
IEQ CREDIT 4.3
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Carlos Salas on
hola, en un ensayo de emisiones COV, ¿el formaldehido se debe tener en cuenta? Un suelo técnico formado con una madera encapsulada metalica, debe cumplir el test CPHD?
Gracias.
Carpark surfaces
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Ekin Caglar Gokbas on
Hi everybody. I have a problem in the project which i am leading the LEED certification. We have parking areas inside of the building basement floor.
Expiration date on Green Label Plus
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Lise Dannesboe on
Hi. Is there a requirement to the expiration date of the certification? We just recevied a carpet with a Green Label plus certificate, which has an expiration date on the 31of decmeber 2017.
Solid quartz flooring
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by CT G on
We are working on a project where the owner would like to install solid quartz flooring (i.e. Silestone: http://content.cosentino.com/docs/silestone/MSDS-Silestone-EN.pdf).
Ceramic tiles vs FloreScore
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Catharina B on
Hi I’m a little bit confusing, please correct me. On my LEED CS v2009 ceramic tiles, stone and resin will be installed part of the CS scope of works.
Tile Crack Prevention Underlay
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by L W on
Do crack-prevention self-adhering underlays under tile fall under the LEED 4.3 scope? Do they need to be FloorScore Certified? Thanks in advance,
Floor finish IEQ 4.3 or IEQ 4.2
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Catharina B on
On our an office building project registered under LEED C&S2009, we applied on floor epoxy paint (with voc less than 100 g/l).
Manufacturer Declaration
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Lilian Seow on
The tile contractor says they can't disclose their floor tile and stone supplier information.
Minimum floor area requirements for EQc4.3?
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Gabriela Hernández Castillo on
For C&S project the main floor surface for common areas is specified as natural stone (granite), which I understand is not considered for this credit.