Dear All,

Our project is located in Portugal and the project team is intendend to install a WaterSense irrigation controller.

I would very much appreciate any help in this one.

I have two turf areas that will not be irrigated after establishment My understanding is that for the water sense calculator you must model them with irrigation is they are landscaped Is this true

Dear all, I am performing the calculation for the Water Outdoor Prerequisite, with both excel for a Project located in Italy (Rome): 1. Water budget tool (downloaded from EPA) 2.

Hi all, I'm doing a LEED v4 NC project in Australia. The LEED v4 manual says to use the Watersense Water Budget Tool (no reference to the v4 Outdoor Water Use Reduction Calculator). My problem w

This is Josef Abboud from Atelier Ten For outdoor areas within a renovation project scope (i.e.

Does the storage of rain water contribute to achieve this prerequisite? The project will irrigate the outdoor vegetation only with rain water.

Hello all, Under Option 1 are vegetated (green) roofs considered as part of the landscape that requires (or does not require) a permanent irrigation system?

there is a minimum of green area (landscape) to comply with the outdoor water use reduction? in v3 I understand should be at least 5% of LEED Boundary.

Hi All, I am gathering all the water use reduction points in v4.