Post a question or comment
Credit Filters
Minimum energy performance
Filter by location
Forum
Topic
Replies
Recent

Baseline building: daylight controls

NC-v4 EAp2:Minimum energy performance
posted by  Ricardo Sá  on 

Hi,

my question is related with the need to consider (or not) daylight controls in baseline building. Table G3.1 (bullet 6) from ASHRAE 90.1-2010 states the following:

18
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Wed Nov 27, 2019, 7:57 pm

LEED On Line Not Working

NC-v4 EAp2:Minimum energy performance
posted by  Ciaran McCabe  on 

I presume others are experiencing LEED On Line not working and saying "We will be back soon! We are performing maintenance and will be back online shortly".

9
CEO
Green Commons, LLC
LEEDuser Expert
586 thumbs up
Mon Nov 25, 2019, 3:39 pm

LEEDv4 New construction - hotels, dormitory, multifamily

NC-v4 EAp2:Minimum energy performance
posted by  Vassil Vassilev  on 

Greetings,

We are to create an energy model for a 8 floor building, which will be partially hotel, partially family apartments.

9
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Nov 19, 2019, 7:45 pm

Lighting Power Density Allowance for covered parking areas

NC-v4 EAp2:Minimum energy performance
posted by  Thanh Le  on 

I have a project with covered parking areas. In ASHRAE 2010 - Table 9.4.3B, there is no category for covered parking areas. How can I determine LPD Allowance for this area?

Thanks!

3
Tue Nov 19, 2019, 6:35 pm

ASHRAE Lighting Mandatory Requirements for Projects Outside the US

NC-v4 EAp2:Minimum energy performance
posted by  Donn Doe  on 

Good Day,

We are working on a project outside the US and would like to clarify if there are any options that speak to the following;

0

Penitentiary Confinement Cells -- Considered Residential or Nonresidential?

NC-v4 EAp2:Minimum energy performance
posted by  Pooja Sannamani  on 

Hello,

Does anyone know if penitentiary confinement cells are considered residential or nonresidential per Appendix G when choosing the Baseline system type?

1
Fri Nov 8, 2019, 2:21 am

Setback requirement

NC-v4 EAp2:Minimum energy performance
posted by  Sofia Barahona  on 

Hi,

We are working on an office building where some private offices are served by split system. How does the setback requirement is met on these specific HVAC system?

 

4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Thu Nov 7, 2019, 8:39 pm

Heat Recovery Exceptions - Baseline Adjustments

NC-v4 EAp2:Minimum energy performance
posted by  RDK E&S  on 

Hi, I'm working on a 2-story 140,000 sf manufacturing facility and wanted some feedback on how to best set up the Baseline. The facility is compromised of a significant amount of office, wareh

1
Fri Dec 20, 2019, 3:49 pm
4
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Fri Nov 1, 2019, 7:56 am