Hello,

Due to building occupant requirements, the opening on the operable window has to be limited to prevent escaping/jumping.

Hi, we are designing a project that has a DOAS unit serving code min outside air through underfloor plenum to the space with ceiling radiant panels handling heating and cooling load.

Our project is a "Major Renovation" project for a historically significant buidling within a historic district.

Hello, I am working on trying to obtain the indoor environmental quality-thermal comfort credit for a new construction. The building contains new open-office workstations.

Hello, I am working on trying to obtain the indoor environmental quality-thermal comfort credit for a new construction. To be specific, the new construction is a restaurant.

Hi! Is there any recommended value för Met and CLO that you must use when you perform your calculation of PMV/PPD etc? Is there any recommended size of the zones that require thermal comfort Cont

I am struggling to make spaces with a low metabolic rate (1.2 or below) comply with ASHRAE 55 at the current temperature setpoints (75 summer, 70 winter - air speed is 40 FPM and RH is 55%). I can

If the project is meeting Thermal Comfort Design (ASHRAE 55) via zoned heating but without AC (temperate climate zone)...

We are working on a project mainly dedicated to showers (83) and changing rooms (20) of a very large complex, with no workspaces within it, Could the project comply with this credit by excluding th