Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent

Plug loads Process Loads savings vs baseline

CI-v4 EAc2:Optimize energy performance
posted by  Xavier Valladares  on 

Hi All,

Is it possible and if so, how would you justify savings in plug and process loads for an interior fit out energy model vs baseline? Can you claim a percentage reduction if

5
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Tue Feb 25, 2025, 6:03 pm

Regd. heating system to be selected in baseline energy model as per ASHRAE 90.1 2013

NC-v4 EAp2:Minimum energy performance
posted by  Anurag Ghosh  on 

Hi, we have a hospital project in India following ASHRAE 90.1 2013 and having cooling as the predominant system.

2
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Fri Feb 21, 2025, 4:01 pm
12
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Fri Feb 21, 2025, 5:01 am

Modeling Multifamily Residential Building

NC-v4 EAp2:Minimum energy performance
posted by  Vassil Vassilev  on 

Greetings,

We are in a process of developing an energy model for a multifamily residential building.

1
Wed Feb 19, 2025, 8:37 pm

Long and short term bike parking for TI project

CI-v4 LTc4:Bicycle facilities
posted by  Lisa Adams  on 

For a CI tentant improvement project, the LEED Rating System Variation language states a minium of two short term and two long term bike parking spaces are required.

0

Skylight >5% of roof area

NC-v4 EAp2:Minimum energy performance
posted by  Junaid Mujahid  on 

If the skylight area is greater than 5% of the roof area, what is the U-Value to be considered for the baseline model?

7
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Thu Feb 13, 2025, 5:34 pm
3
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Tue Feb 11, 2025, 4:32 pm

SHW baseline system and efficiency

NC-v4 EAc2:Optimize energy performance
posted by  Julio Fernandez Amodia  on 

Hi to all,

I am working on an energy model with a large number of showers. It is expected about 8953152 liters/year of hot water demand at 60C.

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Feb 11, 2025, 9:11 am