See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

VRV/VRF PIPING INSULATION

NC-v4 MPR3:Must comply with project size requirements
posted by  Fotis Kotsopoulos  on 

Dear all,

I need to make particular reference to a  BD+C project's technical description with respect to VRV/VRF piping insulation. However:

1
Thu Apr 15, 2021, 5:54 pm
Default Avatar

for option 3 - take light meter measurements with lights on / off?

NC-v4 EQc7:Daylight
posted by  Beth Brant  on 

Does anyone know if we are required to take light meter measurements with the interior lights on or off?

1
Thu May 6, 2021, 2:41 pm
Default Avatar

VOC Emission Limit California Department of Public Health (CDPH) Standard Method v1.1–2010

NC-v4 EQc2:Low emitting materials
posted by  V Leung  on 

According to the Manual, the statement is as below.

0
Default Avatar

Chilled beams with default occupancy

CS-v4 EAp2:Minimum energy performance
posted by  Manuel Martin Delgado  on 

Hello,

2
Thu Apr 15, 2021, 8:36 am
Default Avatar

Credit Scope - VOCs in material ingredients

NC-v4 EQc2:Low emitting materials
posted by  Instra Ingenieros  on 

Hello all,

We are working on a project in Europe and trying to achieve the EQ Low-emitting material credit.

0
Default Avatar

Integrative Analysis of Building Materials

CS-v4 INc1:Innovation
posted by  Chris Lombardo  on 

The project team was able to complete this pilot credit by reviewing information gathered during the material submittal process and analyze supporting product documentation.

0

Color muse device

NC-v4 EQc6:Interior lighting
posted by  Andrew Craven  on 

We have been pursuing Strategy E, Option 2 in the Interior Lighting credit.  We have sealed concrete floors in most of the spaces, which is obviously done in the field and there is no manufact

2
Wed Apr 14, 2021, 7:27 pm
Default Avatar

PILOT CREDIT - ENERGY JUMPSTART

EBOM-v4 INc1:Innovation
posted by  Francisco j  on 

Hi Everyone,

We just wanted to tell you about our experience using this credit. 

0

Photometric Calculations- Perimeter Wall

NC-v4 SSc6:Light pollution reduction
posted by  Zeynep Cakir  on 

Our project is located in LZ2 light zone. Bollard light fixtures are used for landscape and walkway lighting.

1
Wed Apr 14, 2021, 4:21 pm
Default Avatar

Joint use spaces on campus but not within boundary

Schools-NC-v4 SSc8:Joint use of facilities
posted by  Lisa Purdy  on 

Thread from 2010, LEED 2.0 : https://leeduser.buildinggreen.com/forum/do-existing-spaces-count

 

Hi all,

0