Tyler Thumma
7Group
LEEDuser Expert
65 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
Commercial Washer and Dryer requirements for NC- K12 project, LEED v4
NC-v4 EAp2:Minimum energy performanceposted by Divya Shroff on
We are looking to specify a commercial washer dryer for a high school project. The LEED requirement for a commercial washer is atleast 120000 lbs for laundry per year.
1
Sat Mar 8, 2025, 4:01 pm
District Energy for Partial Building Load
NC-v4 EAp2:Minimum energy performanceposted by Jess Scanlon on
I am modeling a new building on a university campus following LEEDv4 Option 1, Whole Building Energy Simulation.
9
Tue Mar 4, 2025, 2:36 pm
Flooring with resin coated broadcast quartz
NC-v4 EQc2:Low-emitting materialsposted by Michelle Rosenberger on
I have seen several flooring product systems now with resins and coatings that use a broadcast quartz or other inherently non-emitting material as one layer.
2
Director of Sustainability
Fentress Architects
LEEDuser Expert
224 thumbs up
Mon Mar 3, 2025, 7:48 pm
Regd. consideration of miscellaneous loads in both proposed & baseline cases as per ASHRAE 90.1 2010
NC-v4 EAp2:Minimum energy performanceposted by Anurag Ghosh on
Hello all,
5
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Mon Mar 3, 2025, 4:32 pm
Regd. Baseline Systems to be used for Buildings with both Cooling & Heating as per ASHRAE 90.1 2010
NC-v4 EAp2:Minimum energy performanceposted by Anurag Ghosh on
Hello everyone,
We are having a datacenter project which requires both cooling and heating as the outdoor temperatures vary from -20 degree C to 45 degree C.
10
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Thu Feb 27, 2025, 1:37 am
Location and Product
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Lance Kinard on
Hello All,
6
Associate Director
Atelier Ten
LEEDuser Premium Member
22 thumbs up
Wed Feb 26, 2025, 8:43 pm
Regd. night cycle allowed in proposed & baseline energy modelling using ASHRAE 90.1 PRM
NC-v4 EAp2:Minimum energy performanceposted by Anurag Ghosh on
Hello all,
6
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4460 thumbs up
Wed Feb 26, 2025, 4:52 pm
baseline system selection for building with very different internal gains in different zones.
NC-v4 EAp2:Minimum energy performanceposted by Moses Chong on
Hi!
3
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Wed Feb 26, 2025, 4:20 pm
Plug loads Process Loads savings vs baseline
CI-v4 EAc2:Optimize energy performanceposted by Xavier Valladares on
Hi All,
Is it possible and if so, how would you justify savings in plug and process loads for an interior fit out energy model vs baseline? Can you claim a percentage reduction if
5
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Tue Feb 25, 2025, 6:03 pm
Regd. heating system to be selected in baseline energy model as per ASHRAE 90.1 2013
NC-v4 EAp2:Minimum energy performanceposted by Anurag Ghosh on
Hi, we have a hospital project in India following ASHRAE 90.1 2013 and having cooling as the predominant system.
2
Assistant Sustainability Manager
L&T Construction
LEEDuser Basic Member
2 thumbs up
Fri Feb 21, 2025, 4:01 pm