See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Single occcupant rooms for brief and silent work - thermal controls required?

CI-v4 EAc2:Optimize energy performance
posted by  Andrzej Gutowski  on 

Dear collegues,

1
Wed Jan 29, 2020, 2:44 pm

Shared Multi-Occupant Spaces within Open Office Layout

NC-v4 EQc6:Interior lighting
posted by  Sarah Gudeman  on 

We have a current project with open office layout (individual regularly-occupied spaces) that also includes what I would call huddle areas (shared multi-occupant spaces) distributed around between

0
Default Avatar

Using Concrete as a material for reducing Heat Island

Homes-v4 SSc1:Heat island reduction
posted by  Bryan Markkanen  on 

Can Concrete be used as a material on site for reducing the heat island.  The albedo or SR index seems to be quite high, so it stands to reason it would be accepted but I haven't found a defin

0
Default Avatar

Fresh air/Outdoor air through infiltration

CI-v4 EQp1:Minimum indoor air quality performance
posted by  Mahesh Shankar  on 

I am working on a CI project which is a factory/office space. The AHU provides fresh air only in certain spaces.

1
Tue Feb 16, 2021, 2:21 am
Default Avatar

Under building Parking roof area calculations

CS-v4 SSc5:Heat island reduction
posted by  Timo Rintala  on 

We have had recent guide from USGBC, that also in case of under building parking roof SRI requirements are to be met. Even if there is eight floors of office in between.

1
Tue Mar 3, 2020, 9:57 pm
Default Avatar

Shared Carparks

CS-v4 WEp3:Building-level water metering
posted by  Ricardo Sá  on 

Dear All,

 

0
Default Avatar

Open fireplaces

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Cristina Florit  on 

I am working in a hotel project where open fireplaces are being considered.

1
Thu May 26, 2022, 2:42 pm

Adaptability vs Flexibility

Healthcare-v4 MRc8:Design for flexibility
posted by  Margaret Montgomery  on 

We have a project planning a facility with about 200 beds, planning to use standardized prefab headwalls in the patient rooms, as well as standardizing room layouts to work for multiple room types

0

HVAC system selection for unfinished spaces.

CI-v4 EAp2:Minimum energy performance
posted by  Graham Langton  on 

I have a a single story building that requires a Baseline system 6 (per table G3.1.1A), which according to G3.1.1 is modeled on a floor by floor basis - So I have 1 system.

3
Thu Jan 23, 2020, 6:06 pm

Lighting Power Density for sauna

NC-v4 EAp2:Minimum energy performance
posted by  Francesco Passerini  on 

What shall I consider as Lighting Power Density (TABLE 9.6.1 of ASHRAE 90.1-2010) for a sauna that is inside a hotel?

Best Regards

3
Thu Jan 23, 2020, 6:00 pm