We are currently preparing our final review, and as part of this credit we are to participate in the forum.

We are working on a building where the exterior walls are going to be changed very little. I have a question about the '3 layers" and the "SCOPE OF WORK".

Does the USGBC accept products that have been tested for emissions in accordance with CDPH v1.2 (2017) for compliance with the low-emitting materials credit?

Is it acceptable if the air leakage testing is done by a subcontractor of the general contractor when all the other aspect of the envelope commissioning are done by an independant CxA ?

Hi,

Dear all

We have submitted for Pilot Credit 87 - Verified Construction & Demolition Recycling Rates.  We received the following comments:

Provide the following:

Hello,

I'm working on a mixed-use tower construction project in Morocco. 

Do all of the adhesive/sealant products used on our LEED v4 cs project need to be consistent with one testing method?

Can somebody confirm if the limits listed in rule 1168 (adhesives and sealants) and rule 1113 (paints and coatings) will be accepted for wet applied products in LEED v4 EQc7?