Forum quick links
CIBSE or CFD to demonstrate compliance with natural ventilation
Homes-v4 EQp1:Ventilationposted by Gustavo De las Heras Izquierdo on
Hallo,
Intumescent Paint and General Emission Evaluation requirements
NC-v4 EQc2:Low emitting materialsposted by Michael Munn on
Do the General Emissions criteria for Paints and Coatings apply to intumescent flame retardants for structural elements? We've had difficulty finding products that meet (or report) compliance.
Enhanced IAQ - EP for 2 strategies under Option 2?
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by Teresa Stern on
We are looking at installing CO2 monitoring at densely occupied spaces. We are also providing a dust collection system monitor and audible alarm at the firing range in a police station.
Does double stacked bicycle racks comply with the credit?
CS-v4 LTc6:Bicycle facilitiesposted by Olga Yuil on
Bicycle racks should reflect best practices in design and installation.
Question: Example 1. Residential and nonresidential density calculations (BDC Page 84).
NC-v4 LTc4:Surrounding density and diverse usesposted by Olga Yuil on
Page 84 'FURTHER EXPLANATION' Section Example 1. Residential and nonresidential density calculations from the BDC Reference Guide (Updated August 2018), question:
final fit-out on tenants request -> designing provisions for negative pressure difficult
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by Mark Kumar Bose on
Hi,
Advanced Energy Metering Whole Building Energy Sources
NC-v4 EAc3:Advanced energy meteringposted by susan eguia on
Hi,
We have Fire Station project and submitted Advanced Meter Cutsheet for Electrical.
CIBSE or CFD to demonstrate compliance with natural ventilation
Mid-Rise-v4 EQp1:Ventilationposted by Gustavo De las Heras Izquierdo on
Hallo,
Existing Building as LCA Baseline
NC-v4 MRc1:Building life-cycle impact reductionposted by Kristen DiStefano on
One of the four options for creating LCA baselines according to this LEED Interpretation - https://www.usgbc.org/content/100002019 - is to use an existing building, and make modifications necessary
Subtraction metering in C&S
CS-v4 EAc3:Advanced energy meteringposted by HoMU WELLTECH on
Good morning,