Forum quick links
water sense equivalent for a project with modular rooms made overseas
Hospitality-NC-v4 WEp2:Indoor water use reductionposted by Gail Napell on
Hi all
CHP eQuest
NC-v4 EAp2:Minimum energy performanceposted by Jorge Lopez de Obeso on
Has anyone successfully modeled CHP in eQuest?
Mechanical ventilation and natural ventilation system requirement?
CI-v4 EQp1:Minimum indoor air quality performanceposted by shashank gangil on
We are doing a LEED CI project which is located in LEED Certified building. The Base building already has provision for natural ventilation in the form of operable window.
Does the independent lab we use need to be accredited for compliance with ISO/IEC Standard 17025?
NC-v4 SSc5:Heat island reductionposted by Ashley O'Neill on
Will a testing report be rejected if the lab follows CRRC-1 but is not an ISO/IEC Standard 17025 lab?
General Emissions Evaluation products in the UK/EU?
CI-v4 EQc2:Low emitting materialsposted by Karen Elliott on
Has anyone found any manufacturers (paints, adhesives & sealants) that can provide the General Emissions Evaluation information in the UK or EU?
Pilot Program 55, Bird Collision Deterrence
NC-v4 INc1:Innovationposted by Lauren Luckowski on
All:
Equest and Single Zone System
NC-v4 EAc2:Optimize energy performanceposted by Konstantina Kalliakoudi on
Hello to all,
Ventilation in vestibules
NC-v4 EQp1:Minimum indoor air quality performanceposted by Instra Ingenieros on
Dear all,
We are working with a project located in a 3C climatic zone. Therefore, our building’s main entrances include a vestibule as mentioned in section 5.4.3.4.
Wastewater Plant Methane-powered Fuel Cell
CI-v4 EAc4:Renewable energy productionposted by on
I have a project on a campus whose microgrid is in part served by a large fuel cell. The fuel cell is powered by waste methane gas purchased from a nearby wastewater treatment plant.
Historic lamposts - not exempt?
NC-v4 SSc6:Light pollution reductionposted by Elizabeth Kertesz on
Our project includes existing, historic lampposts that will remain in place. We may be able to adjust the internal components of the lamps to make them more energy efficient, but due to the s