Forum quick links
CIBSE AM10 Flow Chart (Figure 2.8)
NC-v4 EQp1:Minimum indoor air quality performanceposted by Vitor Tosetto on
Dears, I'm developing a small project LEED v4.
Reporting Clarification for Waste Hauler/Transfer Station
NC-v4 MRc5:Construction and demolition waste managementposted by Melissa Johnston on
Hello,
I work for a hauling company/transfer station and am a LEED Green Associate.
Building Type not listed in Default Occupancy Table
NC-v4 LTc6:Bicycle facilitiesposted by Tim Nabholz on
I am working on a justice centre (court house) project here in Canada and am wondering which occupancy type to use.
Target Finder
NC-v4 EAc2:Optimize energy performanceposted by Edgar Arevalo on
I am working on a sanitation maintenance garage, which is a major renovation project, and I plugged the necessary info at EPA Target Finder.
low emitting mat
NC-v4 EQc2:Low emitting materialsposted by Trayana D on
- When we refer to VOC content evaluation for projects outside US, as far as we understand LEED v4 compliant paints and varnishes shall fulfil European deco paint requirements 2004/42/EC ( ple
Fan power in Baseline
NC-v4 EAp2:Minimum energy performanceposted by Tanushree Charan on
I wanted to understand what is the ballpark for the fan energy consumption for the ASHRAE 90.1 Baseline model for LEED v4.
Airports and LTc2
NC-v4 LTc2:Sensitive land protectionposted by Konstantina Kalliakoudi on
Hello to all,
I have an airport which will be located in a place were today there are olive groves and vineyards land.
Baseline systems modeling requirements
NC-v4 EAp2:Minimum energy performanceposted by Luis Andrade on
Hello!
I'm having some doubts regarding how to model the baseline (BB) building.
When modelling a baseline system (system #5 - VAV):
1) -
Project outside of the US- Any Equivalencies on SR measurement and SRI calculation ?
NC-v4 SSc5:Heat island reductionposted by Marilou Communeau on
Hello,
The project I am working on is located in Europe. The same stone is used for the roof and for the pavement.
District plus heat pump
NC-v4 EAp2:Minimum energy performanceposted by Ilaria Piong on
I have a building composed of two parts: a warehouse and an office.