Hello, could this credit be pursued for a major renovation of a building, or does it only apply to new construction? Thanks!

We are modeling a large data center for LEED V4 using the ASHRAE 2010 appendix G as the baseline. The selection of baseline system is not completely clear to me and I was hoping for some guidance.

I know that it has been asked if previously purchased equipment is exempt from this credit but I'm curious if it can be counted if the relocated equipment is compliant? 

Hi,

LEED V4 BD+C (NC) project,

We are on a Core and Shell office project and is going to calculate the number of bicycle racks for the project. My question is, thus the use of Appendix 2 occupant density a mandatory?

We are designing a mosque in Hatta, Dubai. In which category would Mosque fall into, to calculate bicycle rack and shower requirements?

in the addenda table dated 12-10-2016 , it is stated that Replace "Projects in unlisted countries must comply with the 20%-below-baseline requirement but have no additional performance requirements

LEED reference guide CI v4 says to monitor outdoor air intake flow.

A discussion on the BPDO-EPD forum (http://www.leeduser.com/comment/redirect/66396) has started me thinking about how to treat materials that could fall on a Credit tipping point depending on wheth