Forum quick links
Industry Average for EPD
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Dung Bui on
Hello all,
I am using LEED v4 with Environmental Product Declaration (EPD) things.
Cold Storage Energy Modelling
NC-v4 EAp2:Minimum energy performanceposted by N Sai Balaji on
I am working on a cold storage project going for LEED certification , I am not able to understand the modelling procedure for the refrigerated spaces in eQuest.
Using RCR calculation in an open office.
NC-v4 EAp2:Minimum energy performanceposted by VEL MUTHU on
All,
I am currently working on a office facility/building. When i tried to do the LPD calculation for Energy simulation. I came across few doubts listed below.
Use of Recharge Pits for credit compliance
EBOM-v4 SSc2:Rainwater managementposted by Aarti Dhar on
Will the Use of Rainwater recharge pits comply with the credit requirement?
Addition to an existing LEED Certified Building
CS-v4 MPR2:Must use reasonable LEED boundariesposted by maria esther lamadrid on
I have an existing LEED Certified Core & Shell v2009 Project where there will be an addition of about 40% more.
New V4 Project Boundary Overlaps Existing V2009 Project Boundary
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Doug Shilo on
An existing V2009 Project is getting an expansion that will fall under V4.
Minimal Non-roof for LEED Major Renovation Project
NC-v4 SSc5:Heat island reductionposted by Edgar Arevalo on
The LEED project in question is currently under debate regarding sidewalk upgrade. Originally, the plan was to upgrade the sidewalk, but then that plan was trashed. Now it seems the sid
LCA: Fly Ash percentage (Tally)
NC-v4 MRc1:Building life-cycle impact reductionposted by Mary Couch on
Hello,
Water analysis
NC-v4 WEc3:Cooling tower water useposted by Floyd Valade on
The documentation requirements for WEC3 requires the non-potable water analysis if using 100% non-potable (for 2 points).