Forum quick links
Is there a stormwater management sample document/template for LEED v4?
CS-v4 SSc4:Rainwater managementposted by Qidi Jiang on
I noticed that the sample document provided in the documentation toolkit is applicable to LEED v2009, and not sample document for LEED v4 is available.
projects without HVAC.
Schools-NC-v4 EQp3:Minimum acoustic performanceposted by Víctor Ramírez Orozco on
Hello
Natural Ventilation Procedure - Prescriptive Path 62.1 2010
NC-v4 EQp1:Minimum indoor air quality performanceposted by Nicolas Martinez Ochoa on
Hello everyone,
LEED Interpretation 10231 still valid for v4?
NC-v4 SSc2:Site development - protect or restore habitatposted by CT G on
LEED Interpretation 10231 required a vegetated roof to be an intensive roof system, where the depth of the growing medium is 6 inches or more, and with at least six varieties of sedu
Manage Runoff from Entire Site Requirement
NC-v4 SSc4:Rainwater managementposted by Karina Lairet on
Per the USGBC Guide, it says that the project must manage rainwater runoff from the entire site within the project boundary.
Gender Neutral toilets
NC-v4 WEp2:Indoor water use reductionposted by Jude Chakraborty on
Hello, we are working on an University project which has a directive on Gender Neutral toilets which means there are no urinals in the building.
Room Geometry Adjustment - Baseline Lighting Power Increase
NC-v4 EAp2:Minimum energy performanceposted by Luis Andrade on
Hi,
When modeling the Baseline's lighting power using the Space-by-Space method, may I icrease the Baseline's power by section 9.6.3 (Room Geometry Adjustment) by 20% ( if applicable)?
metal door in factory-finished metal product exception?
NC-v4 EQc2:Low emitting materialsposted by Charline SEYTIER on
Hello,
We have a question concerning the exception in Wall and ceiling categories on 'factory-finished metal product':
photocatalytic air cleaning surfaces
NC-v4 INc1:Innovationposted by Henrik Sarfelt on
Is there a possibility that photocatalytic surfaces will give LEED points?
Excluding reuglarly occupied areas
CS-v4 EQc4:Daylightposted by Jens Apel on
I know there is a must in the rating system variations; but is there any chance in C&S to exclude areas that are defined as regularly occupied?