See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Furniture Category required to comply

CI-v4 EQc2:Low emitting materials
posted by  Michelle Rosenberger  on 

In the Step by Step guidance for Option1, one of the bullets says "furniture must be included, regardless of who specified or provided it." So does this mean that to achieve any low emitting pts, f

12
Thu Apr 12, 2018, 3:13 pm

EA P2 Window to wall ratio

CS-v4 EAp2:Minimum energy performance
posted by  Gabriela Mena   on 

Hi, 

1
Wed Apr 11, 2018, 11:48 pm
Default Avatar

Furniture Category

NC-v4 EQc2:Low emitting materials
posted by  Michelle Rosenberger  on 

In Table 1 of the reference manual, there is a parenthetical comment next to furniture (include in calculations if part of scope of work).

3
Wed Apr 11, 2018, 10:31 pm

Fuel in baseline when proposed design uses renewables for process energy

NC-v4 EAp2:Minimum energy performance
posted by  Patrick Bivona  on 

Hello,

4
Profile picture for user sheffer
Marcus Sheffer
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Wed Apr 11, 2018, 7:52 pm
Default Avatar

Enhanced Indoor Air Flows in Spaces under ASHRAE 170 clasification

Healthcare-v4 EQc1:Enhanced indoor air quality strategies
posted by  Jose Antonio Kovacevic  on 

Hello,

0
Default Avatar

CBECS Data for the project without non-electricity fuel?

CI-v4 EAc6:Green power and carbon offsets
posted by  Seth Lai  on 

The project is a CI retail project that only use electricity as energy supply. And we are going to use CBECS data to calculate the amounts of the Green Power and Carbon Offset.

5
Profile picture for user landryw
Landry Watson
Assistant Vice President - Sustainability
Alexandria Real Estate Equities
LEEDuser Premium Member
26 thumbs up
Wed Apr 11, 2018, 5:10 pm
Default Avatar

entry way and air filtration

CS-v4 EQc1:Enhanced indoor air quality strategies
posted by  MARIA ESTHER LAMADRID  on 

Can entry way systems be located in the exterior but under canopy?

0

New FAQ added on using Revit

NC-v4 EQc7:Daylight
posted by  Paula Melton  on 

We've added a new Frequently Asked Question: Can I use Revit to document this credit?

 

0

New FAQ added on using Revit

CI-v4 EQc7:Daylight
posted by  Paula Melton  on 

We've added a new Frequently Asked Question: Can I use Revit to document this credit?

 

0

New FAQ added on using Revit

CS-v4 EQc4:Daylight
posted by  Paula Melton  on 

We've added a new Frequently Asked Question on this credit: Can I use Revit to document this credit?

0