Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
1
Fri Mar 16, 2018, 5:00 pm

Fritting Question for Quality Views

Schools-NC-v4 EQc8:Quality views
posted by  David Ade  on 

LEED v4 states that “View glazing in the contributing area must provide a clear image of the exterior, not obstructed by frits, fibers, patterned glazing, or added tints that distort color bal

1
Fri Mar 16, 2018, 4:39 pm

Balconies / covered terraces as vegetated roof

CS-v4 SSc2:Site development - protect or restore habitat
posted by  David Lazaro  on 

Could someone please tell me if balconies or covered terraces can count as vegetated roof?

1
Thu Mar 15, 2018, 6:09 pm

CFR and O&M Plan vs Systems Manual and OMM

CI-v4 EAp1:Fundamental commissioning and verification
posted by  Tom Poyner  on 

Looking at the requirements for the CFR and O&M Plan, it appears to have some cross-over with the Systems Manual and O&M Manual. Is it the intention that information is duplicated? How do t

3
Thu Mar 15, 2018, 5:26 pm

Airflow Monitoring for constant volume with DCV

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Nancy Henderson  on 

We are working on a YMCA with multiple single zone packaged rooftop units.  The engineer has designed every unit with CO2 based demand control ventilation to reduce energy use.  The units

1
Wed May 10, 2023, 1:48 pm

Entryway mats required for a dorm that has apartments on the first floor?

NC-v4 EQc1:Enhanced indoor air quality strategies
posted by  Sue Bryant  on 

We have a dorm project that has 4 apartments on the first floor for hall directors. These have their own private exterior entry. There is no further guidance for residential projects.

1
Thu Mar 22, 2018, 6:59 pm

Method for modeling sensor nodes to control automatic blinds.

NC-v4 EQc7:Daylight
posted by  Par Bratt  on 

Hi,

According to the LEED interpretation (ID# 100002149). One is exempt from the ASE criteria (<10%) if incorporating interior automated window blinds or shades. 

1
Fri Mar 16, 2018, 4:54 pm

EPDs for furniture

CI-v4 MRc3:Building product disclosure and optimization - environmental product declarations
posted by  lucy crane  on 

Looking at this from a manufacturer's point of view, which 3rd parties can verify EPDs? Trying to see what furniture needs to comply to the standard.

 

0

What is Required to become a CxA

NC-v4 EAc1:Enhanced commissioning
posted by  Lucas McGill  on 

Hello, I have a little experience with performing commissioning on mechanical and electrical systems in buildings, but never on a LEED project.  I've read that:

1
Thu Mar 15, 2018, 5:06 pm

ISO 14024 Type I ecolabels

NC-v4 MRc2:Building product disclosure and optimization - environmental product declarations
posted by  Cristina Roson  on 

Hi you all, We have a project which is going to pursue both LEED and BREEAM ES cetifications (BREEAM ES as the spanish adaptation for BREEAM).

2
CEO
Green Commons, LLC
LEEDuser Expert
586 thumbs up
Wed Mar 14, 2018, 5:23 pm