See LEEDuser’s guidance on v4 »
Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Minimum Energy Performance and moduline units

CI-v4 EAp2:Minimum energy performance
posted by  Scott Harbaugh  on 

The facility in which we are designing a 20,000+ square foot office space project is served by the old Carrier moduline units.  Is it possible to get EQ prerequisite Minimmum Energy Performanc

1
Tue Nov 28, 2017, 4:55 pm

Architectural Design Guideline for LEED platinum Project under CORE & SHEEL V4

NC-v4 MPR1:Must be in a permanent location on existing land
posted by  Subrota Roy  on 

Hi,

We are going to start Architectural drawing design of one project. ( Project targeted rating level PLATINUM Under CORE & SHEEL V4)

Project data as follows :

1
Mon Oct 15, 2018, 7:43 pm
Default Avatar

greenroofs soils

NC-v4 SSc2:Site development - protect or restore habitat
posted by  Ricardo Sá  on 

Dear All,

1
Fri Feb 23, 2018, 6:16 pm
Default Avatar

Estimate annual energy use of the office outside U.S.

CI-v4 EAc4:Renewable energy production
posted by  Ameet AA  on 

The project is in Ho Chi Minh city - tropical climate, so there is no demand for heating and the office will use only electricity.

1
Fri Nov 24, 2017, 5:57 pm

Combining option 1 and 2

CS-v4 SSc2:Site development - protect or restore habitat
posted by  Emmanuel Pauwels  on 

Our project is a zero lot line. We would be able to install a green roof for 20% of the project site surface which is not enough since the treshold is 30%.

0

IN Credit 2: LEED Accredited Professional

CI-v4 INc2:LEED Accredited Professional
posted by  Allen Cornett  on 

To achieve this credit must you have a LEED AP ID+C as a principal participant, or can you have a LEED AP BD+C as a principal participant on a commercial interiors project and still achieve this cr

3
Default Avatar
Ameet AA
LEEDuser Basic Member
27 thumbs up
Thu Nov 23, 2017, 8:57 am
Default Avatar

design case water calculation

NC-v4 WEc2:Indoor water use reduction
posted by  Azaz Ansari  on 

why is the no information  required to enter in design water calculation to accomodate visitors? 

Please note we have visitor column in calculation sheet.

1
Mon Dec 4, 2017, 5:16 pm
Default Avatar

Defaut Rated-Power

CI-v4 EAp2:Minimum energy performance
posted by  Len Sciarra  on 

does anyone know if there is a default table for equipment and appliances with rated power in V4 like there was in V3? Thanks

0
Default Avatar

Does open space need to be conserved over some period of time?

Schools-NC-v4 SSc3:Open space
posted by  Amy McLean  on 

Does documentation from the school district/owner need to be provided certifying that open space for this credit will not be developed?

0
Default Avatar

Airside HVAC

Schools-EBOM-v4 EAp2:Minimum energy performance
posted by  John   on 
What capacity and CFM value should be entered in the minimum energy performance calculator (air side HVAC tab) for HVAC systems when the capacity value is made to "eQuest default" in order to reduce t
0