Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent

Is lighting inside a facade or double skin considered as exterior lighting ?

NC-v4 SSc6:Light pollution reduction
posted by  Marilou Communeau  on 

Is lighting inside a facade or double skin considered as exterior lighting ?

1
Tue Nov 7, 2017, 6:41 pm

Calculating per Person

NC-v4 LTc7:Reduced parking footprint
posted by  Amber Duco  on 

We have a unique project type (zoo) and are using the "other public assembly" use where you calculate parking spaces by "0.25/person in permitted capacity where not seated".  My question

1
Mon Jan 22, 2018, 5:51 pm

The parking is Under the building

NC-v4 SSc5:Heat island reduction
posted by  Radwa Amin  on 

Hi, Our project is having the parking in the basement floors, makes it all covered. My question is about the parking roof; in our case the roof shall be the "ground floor" and won't be able to co

7
Director of Sustainability
Fentress Architects
LEEDuser Expert
224 thumbs up
Fri Nov 3, 2017, 7:50 pm

Low flow aerators to account for reductions instead of metering

NC-v4 WEp2:Indoor water use reduction
posted by  S. Sachs  on 

Has anyone worked with low flow aerators instead of metering since metering is no longer allowed for v4?

4
Fri Nov 3, 2017, 6:04 pm

What % difference to reference is acceptable?

NC-v4 SSc2:Site development - protect or restore habitat
posted by  Leanne Conrad  on 

We are pursuing the chemical testing path for imported soils. My question is what is the acceptable range or percent difference between the reference and imported soils?

1
Fri Nov 17, 2017, 1:04 am

Bicycle network distance to entrance

NC-v4 LTc5:Access to quality transit
posted by  Ricardo Sá  on 

I'm working on a project that consists of a new office building that will be constructed on top of an existing shopping center.

2
Default Avatar
VP of Innovation
Sustainable Investment Group
LEEDuser Basic Member
110 thumbs up
Fri Nov 3, 2017, 3:56 pm

Made to measure Furniture

NC-v4 EQc2:Low emitting materials
posted by  Charline SEYTIER  on 

Our client is willing to install made to measure furniture that will be composed of elements from 2 pieces of furniture that meet the credit requirements.

1
Fri Nov 3, 2017, 11:03 am

Cooling Towers

CI-v4 EAp3:Fundamental refrigerant management
posted by  Laura Charlier  on 

If cooling tower is being replaced as part of project, does that need to be included in calcs?

0