If we have a ceramic tile wall, do we count the EPD's (if we could get them) for the Tile separate from the Thinset and the Grout, or would all three products be considered as 1 EPD?

It still isn't clear to me what is meant by "USGBC approved environmental product declaration framework" which is applicable for pursuing either option 1 or option 2.

LEED v4 for homes Table 1:Baseline Waste list waste by both bedrooms and conditioned space but there is no guidance as to when one should use conditioned sf vs bedrooms.

For Pursing the option-1. In house IPM Policy: is it mandatory to use the SF Tier-III Pesticide or use government approved pesticide.

Hallo, After reading "further explanation" section of the Reference Guide (page 201) we are wondering how calculations should be made for a district plant where the commercial interior is served b

Markus, thanks again. Since the English is not my mother tonge, sometimes I'm geting confused by enterpreting some explanation although I'm already 37 years in the HVAC branch.

I have a doubt, we have a project of a complex of 3 buildings that is located inside a University Campus.

Sorry for the redundancy - v3 tips offered up the following: "Remember that bicycle storage and shower facilities must be exclusive to occupants for the project, or a sufficient quantity must be p

We’re currently working on a project that is following option one for this credit and calculating the waste diversion in weight.

Hi All! Appreciate if someone can help with the following. The reference guide states that for projects overseas, the products can be tested to either CDPH or AgBB.