We have one non-compliant product on the project to date. It is a PVC glue- less than a liter was used.

Our project may be able to obtain this credit, but it might come down to the last half value for an industry EPD.

Hi all, I have a project CS LEED v4 and I couldn't found a table 1.4 with the new 90.1-2010 Standard on the LEED website. I have read that I can present the table 1.4 based on 90.1-2007 standard

Hi all, anybody having issue with the BPDO calculator? Since we have used for our projects and the data are misplaced under different sheets.

This pre-requisite requires the CxA be engaged by the design development phase. The client for the project I am working on did not decided to pursue certification until 100% design.

We are looking for compliant materials for a School project. Regarding exterior applied products, it seems, that just "applied on site" must be compliant (Adhesives, sealants, coatings, roofing, a

Hi Elliot, Do pedestrian only or bicycle paths, being part of the circulation network, be included in the calculation for block length under Tree-Lined Blocks. Thanks

For Data center project, I've supplied the designer team with the Data Center Calculator, so that they'd be able to fill it in with their project data. However, There are some questions in relation

I have a few questions about this prerequisite: b. How is a block length defined? Is the block length a total for all frontage length of a building or a test for each individual frontage? c.

The second example on pg 536 of the reference guide is a bit confusing.