For an office project we are working on, the tenant is only responsible for their electric consumption and will not have any other fuel source dedicated for them.

Does anybody have any thoughts on certifying an existing building undergoing a major renovation as LEED NC but excluding a relatively small portion of support space that is managed by a different e

Hi, I'm working on a pre-assessment for a project in Morocco and would like to see the minimum wall insulation. I checked in ASHRAE 90.1-2010 but Morocco is not listed in Table B3 International Cl

Has anyone any advice in terms of suitable software that produces outputs files that meet this credit criteria.

Hello all, We have an office project which utilizes waste heat from the neighbor landfill gas plant. The plant and office is owned by the same company.

For an open-plan office space with individual working spaces the project team has used operable windows in order to provide thermal comfort control.

For option 2 it states the products must demonstrate impact reduction below industry average in at least 3 categories. Where do I find those "industry averages" to know if my products qualify?

We are starting with the process of certifying a project under v4 for BD+C. It is a hotel with a main building with a main building of 5,000 square meters plus 2 additional small buildings of 1.000

hi all, we are doing a feasibility study on a CS major renovation project located in South Italy.

Can we consider the IBR (Institut für Baubiologie in Rosenheim) an approved seal which is compliance with LEED v4 requirement for VOC emissions? Attached you will find information regarding VOC te