Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent

VOC limits?

NC-v4 EQc2:Low emitting materials
posted by  Erin Holdenried  on 

Where is the VOC limit table for wet-applied products? I can't find any tables or mention of the referenced standards for VOC limits in the Reference Guide . . .

2
Default Avatar
Project Manager
Entuitive
LEEDuser Basic Member
19 thumbs up
Fri Dec 23, 2016, 8:43 am

V4 Demand Response

NC-v4 EAc4:Demand response
posted by  Jen Roberts  on 

I have a couple of questions regarding this credit: 1) The credit states that to design a fully-automated Demand Response or tp utilize a semi-automated DR.

3
Senior Sustainability Engineer
Metec Consultants
LEEDuser Basic Member
12 thumbs up
Thu Dec 22, 2016, 3:03 pm

Financial support option

EBOM-v4 SSc1:Site Development- protect or restore habitat
posted by  Tracy Smith  on 

Hi, Just want to make sure I'm understanding this point correctly.

10
Lead Sustainability Consultant
Eight Associates
LEEDuser Basic Member
0 thumbs up
Wed Dec 21, 2016, 11:11 pm

Raw Material Source and Extraction Reporting

NC-v4 MRc3:Building product disclosure and optimization - sourcing of raw materials
posted by  Dionisio Franca  on 

Hello, Tarkett, a flooring company, states that their CSR report meets LEED's sourcing of raw material option.

5
Tue Dec 20, 2016, 6:35 pm

VOC - exempt compounds larger than 1%

Retail-NC-v4 EQc2:Low emitting materials
posted by  Ian McCall  on 

Hello, The LEED guidebook, states "If the applicable regulation requires subtraction of exempt compounds, any content of intentionally added exempt compounds larger than 1% weight by mass (total e

6
Default Avatar
Sustainability Consultant / Architect
LEEDuser Basic Member
0 thumbs up
Mon Dec 19, 2016, 3:26 pm

French VOC emission labeling

NC-v4 EQc2:Low emitting materials
posted by  FABIO VIERO  on 

Hi all Could you confirm that for General Emission Evalutation, French VOC emission labeling is accepted even if in the document http://www.usgbc.org/sites/default/files/Low%20Emitting%20Third%20Pa

7
Independent consultant on VOC issues
formerly with Eurofins Product Testing A/S
LEEDuser Basic Member
246 thumbs up
Thu Dec 15, 2016, 4:45 pm

Baseline outdoor airflow with EN 15251 and DCV

CS-v4 EAp2:Minimum energy performance
posted by  Sandra Holmström  on 

Hi, We have a LEED v4 project (office building) were the project team want to use the CEN option for IEQp1 (using EN 15251 instead of ASHRAE 62.1). Also, for the energy modeling, the Proposed bui

2
Thu Dec 15, 2016, 7:07 am

CxA Same for all Paths?

NC-v4 EAc1:Enhanced commissioning
posted by  Brian Salazar  on 

Does the CxA need to be the same firm/person for Path 2 and Option 2, as it does for Path 1?

4
LEED Fellow
Integrated Design + Energy Advisors, LLC
LEEDuser Expert
377 thumbs up
Tue Dec 13, 2016, 6:42 pm

Permanently Installed Furniture?

CI-v4 MRc3:Building product disclosure and optimization - environmental product declarations
posted by  Michael Smithing  on 

Option 1 requires that products be permanently installed. Do furniture products installed in a LEED CI project qualify for inclusion in the EPD list?

2
Default Avatar
Project Coordinator, LEED AP, GHG IQ
Teknion Ltd.
LEEDuser Basic Member
3 thumbs up
Tue Dec 13, 2016, 5:49 pm

Value of Enhanced Commissioning

NC-v4 EAc1:Enhanced commissioning
posted by  Hannah Fleck  on 

I have a client who is asking what the value of pursuing enhanced commissioning versus fundamental.

2
LEED Fellow
Integrated Design + Energy Advisors, LLC
LEEDuser Expert
377 thumbs up
Tue Dec 13, 2016, 1:57 pm