A potential CI project has a core in the middle of the space, which is not part of the project but belongs to the landlord. No work will be done there.

My project is new construction - a hangar at an airport that will be used for painting jet airplanes. The owner already has previously built a building adjacent to our site with a parking lot.

Hi all, Thanks for the comments/feedback above. We have a small playing field/recreation field within our boundary adjacent to our building.

We have a fairly complicated building project that includes two areas that are unclear to me as to whether they should be included in the gross floor area calculation: 1.

Does the 10% excluded square footage for one credit (allowed in EBOM 2009) have to be the same excluded square footage used in another credit?

Hi! My project is using double glazing facade, there is inner glass at the floor, then big air gap and the outer glass that is hang by a steel structure.

The property my project is being built upon is 25,920 SF and my LEED Project Boundry contains 31,348 SF.

This might be an easy one... Our PI form 2 was recently not approved following final design review.

Dear All:- Our Project is G+5 Factory Building compare to other floors ground floor (floor area) is less in that place we have landscape and Parking so it under the first floor but parking is j

I have a project with a Lot area of 25,000 SF and a LEED Project Area of 31,000 SF due to sidewalk and landscape scope of work in the ROW.