Dear all, Currently I have a project where energy meters comply with all the corresponding credit requirements except that they do not display energy demand.

I am working on a manufacturing facility addition where the owner wants to pursue LEED certification. The LEED energy model turned out that we are not going to meet the 10% minimum.

Hi, I am trying to classify an HVAC System (for the Baseline model) of 3731 m2 distribuited on 6 conditioned floors (HealthCare facilities). Checking the Table G3.1.A (Ashrae 90.1-2007) apparentl

i m using HAP 4.41 for HVAC load calculation and energy modeling but unfortunatly the weather data available is hourly average s it ok to use for leed energy simulation or i ahve to go to another f

We have a culinary school, the minimum OA per 62.1 is only 10k cfm, but the fume hood exhaust can go above 100k cfm.

I have couple of questions about filling table 1.4.7: 1- Table 1.4.7A asks for the total cooling capacity, I use HAP 4.6 and the cooling capacities are calculated according to ASHRAE 90.1.

Hello, I am working on a project in Climate Zone 4 and was wondering if there is any guidance that pertains to buildings with entries that open to a ventilated parking structure which would allow u

Dear All:- Recently we submit the factory building to LEED as Individual project certification not for group certification.

Does the LEED online form want me to list each space room by room, or are a few overall general space types okay?

Dear Group, As you know additional requirements from LEED led to purchased heat water coils being substituted for furnis heat coils in some unitary systems.