Hi all, For the people who have submitted for LEED (v3) using Trane Trace: To what level of detail do you model the heating and cooling cfm and exhaust cfm on room/zone level for large buildings?

As far as we read the Mandatory Requirements of ASHRAE 90.1 required by EAp2, performance requirements must meet the specifications of Table 7.8.

Dear forum, We have a very critical problem for a LEED C&S 2009 project located in the north of Mexico. The project will be a 13th story office building.

Recently, there was a discussion in this forum on exterior lighting being a mandatory requirement for EAP2 compliance.

To generate baseline for HVAC systems, the building total SF is 28000 including walk-in coolers and an outside mechanical room. My question is, Can I model the walk-in cooler separate?

I am currently working on a project in Kenya. The cooling load for the commercial office tower is around 1900RT. This project will attempt for LEED CS and will be targeting Silver rating.

This question relates to the thread below (“Absorption chiller in baseline model”) but is of more general nature.

Dear all, I'm am modelling a project that is aiming to get EAp2 at design submittal with Tender Documentation LOD (Level of Detail), meaning there are lots of parameter only defined by technical sp

Dear all, I have an office building with an auditorium, which is served by the same AHU that serves the surrounding office.