The question is related to Group Approach when we input two building details in minimum energy performance calculator, out of two building one of the building will not achieve the energy cost savin

In a building that I’m going to model presence sensors are installed in all the internal spaces. It is an education center.

I have a Client that is considering LEED certification, we have done a preliminary energy model, we show a 24% savings off the baseline.

Hi everybody, The project is a garment factory. We are modeling a 100% outdoor air IEC system for the proposed case. And the system 8 (VAV with PFP Boxes) is modeled in the baseline case.

Is it really necessary to fill out the EAp2-Section 1.4 Tables spreadsheet when it looks to me like EnergyPro provides all the same data in the exact same format?

Greetings. This is more of a LEED for Retail question pertaining to modeling a commercial kitchen.

Hello everyone, Are the maximum SHGC values in ASHRAE 90.1-2007 suggested only? For example on table 5.5-1 there is a max SHGC listed of 0.25.

Hi! when i have a solar water heating system, must submit like energy savings? Thanks

I am working in projects in Mexico and it has been a challenge to model heating when we have none. Sometime when modeling heating comes out higher in the proposed design than in the baseline and t

I'm modelling a European Industrial project where nearly a 5th of the floor area is a specialist process area, similar to a clean room or laboratory, however used for industrial processes, in use 2