Forum quick links
ASHRAE 62.1
NC-2009 IEQp1:Minimum IAQ Performanceposted by Kristopher Lashley on
We have an electrical room on site that is not attached to the main building and will hold the electrical equipment for a diesel fueling station.
Ez & MERV Requirement
NC-2009 IEQp1:Minimum IAQ Performanceposted by SAMY Chamy on
Dear Concern:- Is there any MERV filter requirement for IEQ PR 01 credit as per ASHRAE section 5.9 (is it mandatory) What are the Ez values should be used for below equipments????? 1.Fresh air f
Min OA rate of a VAV syts with DCV
NC-2009 IEQp1:Minimum IAQ Performanceposted by Chellapillai Srinivasan on
How do one determine minimum outdoor air intake flow of a VAV system coupled with demand controlled ventilation to comply with ASHRAE 62.12007 standard required for at different operating condition
Heating and Cooling Ez, and Occupant Diversity
NC-2009 IEQp1:Minimum IAQ Performanceposted by Hernando Miranda on
It seems that the certification reviewers do not know when heating and cooling occur in a space.
CFD based air changes vs mechanical exhaust.
NC-2009 IEQp1:Minimum IAQ Performanceposted by Rudolph Carneiro on
Hey andrew.
IEQ Pr1 & c2 - work code in France in place of ASHRAE
NC-2009 IEQp1:Minimum IAQ Performanceposted by Nicolas MOLLE on
Hello, IEQ-p1: Work code is more stringent than ASHRAE, so we'll use work code air rate to justify prerequisite The question is: we want to obtain the IEQ-C2 increasing by 30% the air rate BUT o
Recirculating airflow, table 6.4 and cold rooms
NC-2009 IEQp1:Minimum IAQ Performanceposted by Daniel Rimbault on
Good morning everyone.
Natural Ventilation in Cold Climates
NC-2009 IEQp1:Minimum IAQ Performanceposted by Eric Webber on
Hello, I am curious about implimenting natural ventilation in climate zone 6 where the winter temperatures can be very cold.
Ventilation requirements for showers
NC-2009 IEQp1:Minimum IAQ Performanceposted by Ricardo Sá on
Can anyone please clarify which, if any, ventilation requirements are applicable to shower spaces whithin a sports facility (e.g. exhaust rate per shower) under ASHRAE 90.1 (2007)?