Hi - this is my first full blown LEED job to document.  I am getting ready to send the forms to the MEP subs for them to fill out for IEQc4.1.

My project located in South Korea. So I often fall into difficulties to interpretation manufacture data.

The material is "Scotch-WeldTM Hi-Strength Postforming 94 CA".

My project is located in South Korea, so I open fall into difficulties to interpret manufacture data. 

What are the acceptable forms of documents stating the VOC content in a material? I have the following three forms: 1. Technical data-sheet from the supplier stating the VOC content.. 2.

In what category would this product be?

I'm aware of the CALGreen Alternative compliance path for achieving these two credits, but the requirement states that an approved building permit or final certificate of occupancy in order to be c

We have a project that uses a waterstop in an elevator pit. The waterproofing is on the exterior side of the concrete.

Would a resin floor be considered a floor coating (under IEQc4.2 and controlled VOC content), or a polymeric flooring system (under IEQc4.3 and controlled emissions)? I find that according to the

For this kind of sealant, can I just put it under Architectural Sealant?

I received an interesting question from my contractor - he is requesting to use a general construction adhesives sent to him by the woodwork sub (it's a Liquid Nails product from Akzo Nobel Paints)