Post a question or comment
Credit Filters
Low-Emitting Materials—Adhesives and Sealants
Filter by location
Forum
Topic
Replies
Recent

Grouting

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Petra Hajná  on 

Hi. We want to use a grout for surface leveling under the baseplate of steel anchors on roof.

1
Tue Jan 24, 2017, 9:22 pm

Sherwin Williams Pro-Cryl Universal Primer

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Celimar Fournier  on 

Under what category should I assign the Sherwin Williams Pro Industrial Pro-Cryl Universal Primer? This is an acrylic primer.

1
Wed Mar 29, 2017, 9:27 pm

Hot Melt Adhesives

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Bruce Maine  on 

I thought I knew the answer to this question but can't confirm. Are Hot Melt adhesives used in the application of laminates covered by the 80 g/L threshold? Thanks!

1
Tue Jul 17, 2012, 7:59 pm

EMICODE as compliance to this credit? and other IEQc4?

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Agnes Vorbrodt  on 

Many manufacturers state that a product is low emitting, and as a proof send Emicode certification/results.

1
Wed Mar 20, 2013, 10:57 pm

n/a

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  MARIA ESTHER LAMADRID  on 

How should i classify an elastomeric butyl rubber sealant- sealant tape used in the metal roof

1
Wed Feb 3, 2016, 1:32 am

European Certificates accepted?

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Nicole Isk  on 

Adhesives and sealants must meet the VOC limits defined by the SCAQMD Rule 1168 respectively the Green Seal Standard for Commercial Adhesives GS 36.

1
Mon Feb 14, 2011, 12:24 pm

VOC for fire proofing / intumescent sealants

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Stacey Olson  on 

Would fire proofing / intumescent sealants be considered "Other" or "Architectural Sealants"? I did not find it itemized in SCAQMD 1168. Thank you!

1
Wed Aug 31, 2016, 1:21 pm

Category for IEQ Credit 4.1

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  S D  on 

I am new to the LEED process. I am having trouble determining which categories the following products fall under for the purpose of IEQ Credit 4.1.

1
Mon Nov 26, 2012, 6:44 pm

Concrete volume stabilizer

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Lourdes Salinas  on 

Under which category does a concrete volume stabilizer classify? It´s a granular powder without metal particles, ready mix which only needs water.

1
Mon Nov 4, 2013, 1:42 am

aerosol line saver (also posted in IEQc4.1)

NC-2009 IEQc4.1:Low-Emitting Materials—Adhesives and Sealants
posted by  Lyle Axelarris  on 

I also posted this in IEQc4.1 since I do not know where, if anywhere, this product would go: Has anyone considered reporting the use of aerosol "line saver"?

1
Wed Apr 15, 2015, 3:44 am