Forum quick links
Performance Period
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Tristan Schwartzman on
If the audit was conducted in 2014 and we are submitting the LEED application in 2019, does the performance period start date need to be in 2014?
End use breakdown for tenants
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Gabriela Crespo on
Hi Guys!
When to redo the ashrae energy audit for a re-certification.
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Richard Klein on
When reading through the LEED re-certification guidelines it states that an ASHRAE energy audit must be done once every 5 years, however, it also states that the performance period is between
ASHRAE Level I and II Audit timing
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Izabela Kwiecinska on
Hi,
ASHREA audit though newly renovated
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Mathilda Jonsson on
Hello Five years ago my project building were LEED EB:OM certified and now with new tenants and a renovation taken place we are recertifying.
EAp1 Review Comments
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by matthew strong on
We recently received review comments asking us to list energy demand savings and maintenance cost savings for our EEMs.
Best Timing for ASHRAE Audit?
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Nelina Loiselle on
What is the best timing for the ASHRAE Level I walkthrough audit? We have our energy star label already, are working on getting our tracking in place for the other credits.
Change energy consumption data after Preliminary review
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Szymon Zwoniarkiewicz on
We are in the process of pursuing LEED EBOM certification, for a project located in Europe. We have submitted the documentation for preliminary review.
Sequence of Operations
EBOM-2009 EAp1:Energy Efficiency Best Management Practicesposted by Martha Norbeck on
Hello LEEDuser forum, I am doing the documentation for a small building (4,500 sq. ft) with a small mechanical system.