I have a school building with an old walk-in coolers/freezers used in the Kitchen. Those do have CFC refrigerant.

I am working on a project where the main unit is new and thus in compliance but there is a backup unit which uses CFCs.

I have a third party report and analysis on my CFC eliminiation options. However, the report was conducted in 2009.

Does the 10% exclusion rule apply to this credit?

if actual Rc (lb/ton) of the chiller and other refrigerant units are unknown then will i able to take default.

I am working with a large building in New York. This building has a tenant that has their own chiller that utilizes R-11 refrigerant.

I have completed a Refrigerant Management Plan for a building and when I go to upload it to the EAp3 credit there is nowhere to place it.

Our project is served by district heat and cilled water plant. The plant, owned by different componay from our project owner, uses CFC refrigerant for some of chillers.

Comments below say portable equipment that is not base building (but with greater than 0.5 pounds of refrigerant) can be excluded from this prerequisite, but the FAQ section reads: "Yes, small app

EA credit 5 - Enhanced Refrigerant Management is currently denied in our project for the Refrigerant Impact per ton value exceed the allowable 100.