I received comments back from a reviewer that data center/server rooms should be classified as "active storage" with 0.8 W/sf allowance.

we have a project with a led strip only for decorative purpose and not included in the luxes calculus. This led strip is located on the ceiling illuminating the roof.

Hello Everyone: First of all, I have read previous posts, and I have seen that this subject has already been discussed, but the way I see it, in this case it might be a special circumstance. We a

Has anyone had experience in calculating additional reduction in LPD by incorporating a significant number of occupancy sensors in their office lighting planning?

Our client is looking at a sculpture for an LEED CI space. The sculpture is made from wire and LED lighting.

When reviewing the CI forms from an older project that were filled out by a consultant, I noticed they had taken 10% credit towards the installed lighting power for occupancy sensor control of ligh

We have a project where the Tenant is taking over part of the Core and Shell building's underground parking and have cordoned off the area with fences and gates etc.

We have a residential project - with a double height entrance lobby (main entrance to the bldg) - and I am not sure how to calculate the LPD for this space - should I treat it as: 1) Lobby (14W/m2

I have a renovation project where there are three rooms in which we are not replacing the light fixtures.