This question is in regards in to LEED CI 2009 - Credits EAc1.1 & EAc1.2 for lighting power density and light controls. Do tenants have to account for common areas and spaces for lighting powe

We have a retail banking project. the building is 2 stories high + a roof top and was renovated. We installed a roof garden on it. we also install light fixture surrounding the roof garden.

I received comments back from a reviewer that data center/server rooms should be classified as "active storage" with 0.8 W/sf allowance.

we have a project with a led strip only for decorative purpose and not included in the luxes calculus. This led strip is located on the ceiling illuminating the roof.

Hello Everyone: First of all, I have read previous posts, and I have seen that this subject has already been discussed, but the way I see it, in this case it might be a special circumstance. We a

Our client is looking at a sculpture for an LEED CI space. The sculpture is made from wire and LED lighting.

Has anyone had experience in calculating additional reduction in LPD by incorporating a significant number of occupancy sensors in their office lighting planning?

We have a project where the Tenant is taking over part of the Core and Shell building's underground parking and have cordoned off the area with fences and gates etc.

When reviewing the CI forms from an older project that were filled out by a consultant, I noticed they had taken 10% credit towards the installed lighting power for occupancy sensor control of ligh