Our project is In Italy and most of the cutsheets, certifications and declarations that we have are written in Italian and not in English.

Our building project is a methane pumping facility located at landfill that is the source of the methane.

I thought I knew the answer to this question but can't confirm. Are Hot Melt adhesives used in the application of laminates covered by the 80 g/L threshold? Thanks!

Pyro-Guard Plywood (fired treated). How should i document this for MRc7? My co-worker says 100% for new wood & 0% for FSC, is this correct?

It is my understanding from the credit language that you can combine multipliers from the Certification pathway and the EPD pathway which is what we would like to do for our project.

My project is pursuing Option 1, stormwater assessment report, of the Full documentation option of the O&M submittal path (what a mouthful!) of SSc6.

This question is a little difficult to describe in writing- is there a maximum angle of incidence from perimeter glazing for a “direct line of sight?” If you are directly in front of the window lo

Dear all, The project we're working on will be cooled with centrifugal chillers.

Dear all, The project we're working on will be cooled with centrifugal chillers.

On our campus all cleaning supplies are purchased centrally by our housekeeping vendor.