In 7.4.4.2 Temperature maintenance controls recirculating hot-water systems shall be equipped with automtatic time switches or other controls that can be set to switch off the usage temperature mai

Many manufacturers state that a product is low emitting, and as a proof send Emicode certification/results.

We are trying to pursue this credit, by using municipal 'brackish' water for irrigation and toilet flushing.

In order to compare apples to apples (efficiency) lets assume the unit as lumens/Watt.

Hi Marcus, I was reading the discussion about modeling adjacent shading for the both models (baseline and proposed models) that you had with Mark Benson, but It's still not clear for me. I’m work

If my buiding type is not in Energy Star and I don't see it really in the 2003 CBECS PerformanceTargetsTable and I try to use what I think is closest.

We are working on a small scale LEED-CI project that the area is about 8,700 sf. We currently face a problem when filling the information in the template.

We have a residential project that wishes to apply for LEED-NC, due to climate conditions no HVAC system will be implemented and 100% of ventilation will be natural (no mechanical equipment at all)

For a CS project, we will show a plan of a typical floor with the layout. However, in the Views calculation spreadsheet do we need to include all floors or is one floor sufficient ?

We have a huge project, if the project site is a greenfield, but it has neither trees nor plants; is it possible to install the "construction camps" outside the building footprint and once the proj