Forum quick links
Desiccant Wheel Modeling for Baseline case
NC-v4.1 EAp2:Minimum Energy Performanceposted by John on
I am working on a model which has Desiccant wheel in design case. Do we need to model desiccant wheel in baseline case as well?
Thermal Comfort Control
NC-v4 EQc5:Thermal comfortposted by Martin Maribo on
How can individual thermal comfort controls be achieved for individual workstations in an open office?
Electricity with Demand Flexibility
Pilot-Credits EApc152:GridOptimal Building ACPposted by Cory Duggin on
What is the best way to determein any electricity with demand flexibility? What should I input in the form if it is 0? If I enter 0 it acts like all fields haven't been filled out, so I
CDWM - Recycling Facility Diversion Rate
NC-v4 MRp2:Construction and demolition waste management planningposted by Preethi Sreeraj on
It is clear from the guidance that a project will need the diversion rate of the Comingled facility that is regulated by local or state agency, but is this applicable for source separated wast
Location of outside airflow measuring station inside the HVAC unit
NC-v4 EQp1:Minimum indoor air quality performanceposted by Edgar Arevalo on
We have a 100% outside air HVAC with an energy recovery wheel serving the entire the project space. Since there is no recirculating air getting reintroduced to the supply side, the MEP engine
Problems with v4v4 1_Indoor Water Use Reduction Calculator_v05.1.xlsm
Schools-NC-v4 WEp2:Indoor water use reductionposted by Alexia Anastassiadis on
Hi all!
Biophilic Design as a Guiding Principle in Sustainable Design
Pilot-Credits EQpc123:Designing with Nature, Biophilic Design for the Indoor Environmentposted by Carla Roubaud on
Securing this credit goes beyond ticking boxes; it requires thoroughly blending natural elements into the architecture.
Shower in Mixed Use Residential/Retail
NC-v4 LTc6:Bicycle facilitiesposted by Michelle Rosenberger on
I am confused about the shower requirement in a residential building that has retail space on the ground floor.
LEED v4 Heat Island Reduction - include elevator shafts and stairwell enclosures in roof calcs?
NC-v4 SSc5:Heat island reductionposted by Julie Baines on
Hi all, I am working on a major renovation of an existing downtown campus building. The entire roof of the building is being redone with white TPO.
Location of outside airflow measuring station inside the HVAC unit
CI-v4 EQp1:Minimum indoor air quality performanceposted by Edgar Arevalo on
We have a 100% outside air HVAC with an energy recovery wheel serving the entire the project space. Since there is no recirculating air getting reintroduced to the supply side, the MEP engine