If adhesives, sealants and primers are listed on Tables listed under Groups 2, 3 or 4 and they meet the California Department of Heath Services Standard, does this constitute compliance with Prop 6

If all of our surfaces meet the minimum thresholds for reflectance - as documented by manufacturer-provided cut sheets - do we need to include calculations for a weighted average of surface reflect

In one of the chain company, it only exits leasing contract both with computers and printers/ scanner equipment. Contracts cover fixing and change by their services.

Has anyone found a sanded grout that doen't have silica sand in it? It seems like our only option is to go with an unsanded grout or something more expensive....

Hi, I am working on a mixed use project with retail on 1st floor and office on 2nd and 3rd floor with a total project area of 115,000 sf.

I recently got a review back that said that every material I am using to demonstrate compliance for Mrc5 is an assembly and "therefore, the individual components must be separated by weight." Sinc

I am working on certifying a warehouse, and would like to consider the forklifts as individual workstations, as the warehouse employees are each assigned one (in lieu of a desk) and allowed to pers

We are working on a project in Costa Rica where the access road is a dirt road.

Per step 2 for noninpatient buildings and areas "for portions of the perimeter wall with full-height glazing, the qualifying area may be extended beyond the 15-foot limit to twice the head height o

does the raised floor has to meet the floorscore requirements?