Forum quick links
Chinese Green Electricity Certificate "GECs"
NC-v4.1 EAc5:Renewable Energyposted by Josef Andersen on
Hi!
It came to my knowledge that USGBC does not accept Chinese Green Electricity Certificate "GECs".
Make Up Air Units Modeling Requirements (System or Process Load) - ASHRAE 90.1-2010
NC-v4 EAp2:Minimum energy performanceposted by Richard Tran on
Hello,
Water Heater Efficiency per Table 7.8 of ASHRAE 90.1-2010
NC-v4 EAp2:Minimum energy performanceposted by Richard Tran on
Hello,
20 kinds of permanent installation materials
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by FEI WANG on
We have a hotel project, the use of high-grade wallpaper, valid for more than 10 years, can be counted as permanent installation materials
Public park adjacent to the project boundary
NC-v4.1 SSc3:Open Spaceposted by Eslam Elshorbagy on
Hello,
owner occupied area only?
NC-v4 EAc7:Green power and carbon offsetsposted by Alfonzo Collins on
I'm working on a residential building with about a dozen apartments and limited common area. The apartments have their own utility meters, sand ownership has no ability to read those meters (
CDPH v1.2-2017 using a Classroom Environment, for BD+C: Schools
Schools-NC-v4.1 EQc2:Low-Emitting Materialsposted by Cam Burkacki on
Hi all,
LEED v4.1 O+M, Energy and Atmosphere - Energy Performance - Arc Platform - CHP
EBOM-v4.1 EAp3:Energy Performanceposted by Flotra Stamm on
We have a question regarding filling out the data information in ARC platform for a CHP. It produces heat (natural Gas) and electricity.
Hand-washing faucets in Classrooms or Cafeteria
Schools-NC-v4 WEp2:Indoor water use reductionposted by Danielle Waters on
We have an Elementary project confused whether to specify low-flow on Classroom faucets and 'hand wash' faucet in Cafeteria prep area.
Test and balance
NC-v4 EAc1:Enhanced commissioningposted by Heather Holdridge on
I understand that there were not any requirements regarding TAB in LEED 2009 -- is this still true for v4? Just want to confirm that there are no issues with having the balancer contracted un