Dear sir, according to G3.1.2.5 of 90.1, Minimum outdoor air ventilation rates shall be the same for the proposed and baseline building designs except that When modeling demand-control ventilation

We are working on an pharmaceutical production building that requires all building occupants to enter a changing / locker area right after the main entry to the building.

Our project site currently has three existing buildings and over 300 parking stalls. All of these buildings and parking areas will be demolished under separate contract.

Greetings, We have a doubt about the credit EA C3.2 from LEED EB O&M. What is the minimum time to measure performance of the major’s building systems by the breakdown of energy?

In one of our projects, we've 100% naturally ventilated school building, which will have ceiling fans for comfort, a total area of approx 80,000 sqft, Ground + 2 floors.

We are working on a Project with a central 100%OA AHU. We calculated the pressure drop adjustment for the baseline Systems 7 following ASHRAE 90.1-2007 table G3.1.2.9.

When modeling a project that has a baseline building requiring system #8, the system cooling tonnage is > 600 tons therefore G3.1.3.10.

Dear all, We are doing a project with an IT office complex. The largest possible waste stream is E-Waste, food and paper. We do not see much potential for glass and metal waste streams.

The building to be certified is an office, hotel and retail complex and is composed of two seperate buildings. There are no structural connections between the buildings above ground.

The project is a residential building, but also has a small recreation space in cellar and a small retail space and gym on ground floor, how should the usage groups be defined?