Possibly I posed this question under the wrong credit. I posted it under SSc4.2 last week and didn't get a response, so am trying again under this credit.

There is a non-potable aquifer under the building's basement. Can we install a well to extract this water and use it for irrigation and flush the toilets?

I am documenting a Winery that is being built on a Greenfield. We have set the limits of construction of the project in accordance with the LEED requirements.

Per the LEED Credit Library, there seems to be confusion, or room for interpretation, on how to pursue Whole Building Water Performance Measurement for an Innovation credit in BD+C projects.

Hi! We have a data sheet from a shower which specifies a flow of 7,8 liters/minute at a pressure of 5.5 kgf/cm2 (which is equivalent to 5,39 Bar or 78 PSI).

Hello, We have a project with the following site constraints: The LEED Project Boundary includes 2 new buildings: an office tower, and a small bank building.

For LEED EBOM 2009, IEQp1, are exhaust fan test reports required for every fan or just one per type.

If there are rainwater management measures taking place as part of the masterplan surrounding and including the project building but these are not within the LEED project boundary, can those measur

Under the LEED Core & Shell Version 4, the project will be connected to a district heating and cooling plant. Can this be claimed as a renewable energy source under EAc5?

If the building is connected to a DES system, do both the DES system as well as the building itself need to be modelled?