My CI project is a TI within a large multi-tenant building that is already EBOM certified. Bike racks and showers are in place, and were not augmented as part of this TI.

Hi, I am working on a large project in Australia that has used local code. The local code is more stringent than 62.1 however needs to be documented for the submission.

Hi, I am registered for this Pilot Credit.

I have roof top units. Each serves several rooms. One system serves a single room with single thermostat.

Is there a tie-in somewhere that requires individually metered homes/units in LEED for Homes?

Hi all, We pursued Pilot Credit WEpc10 through Option 2, and planned to use recycled grey water for flush fixtures.This recycled grey water accounts for 100% reduction in flush water user from the

Hi, The project intents to follow option 3 Perspective compliance path Advanced Building Core Performance Guide.

Does ASHRAE 90.1 2007 have any code compliance for interior lighting LUX levels ?

Does any body know how to set "Maximum Primary Air Flow Rate" ,"Maximum Secondary Air Flow Rate" ,"Minimum Primary Air Flow Fraction" and "Fan On Flow Fraction" in energyplus to meet G3.1.3.15 "--

I received this question in IEQp1: "The ventilation calculations indicate that the value of the flow rate of air projected under the condition tested (DS) was modeled as 100% level for each of th