Forum quick links
COMMISSIONING
CI-2009 EAp1:Fundamental Commissioning of Building Energy Systemsposted by Yaser Al Sharif on
WE ARE WORKING ON LEED CERTIFICATE FOR CI BUILDING (14000 SQUARE FOOT) THE POINT IS, WE HAD RENTED OFFICE AND THE HVAC SYSTEM WERE INSTALLED SINCE FIVE YEARS AGO, NEWLY WE INSTALLED NEW HVAC EQUIPM
CFD based air changes vs mechanical exhaust.
NC-2009 IEQp1:Minimum IAQ Performanceposted by Rudolph Carneiro on
Hey andrew.
Alternative HVAC duct sealant
NC-2009 IEQc3.1:Construction IAQ Management Plan—During Constructionposted by John Covello on
Hi, My contractor is proposing and alternative method to sealing the air conditioning ducts. They would like to use a foam for the duct end that would be air tight.
Energy Cost broken out in Lease
CI-2009 EAc3:Measurement and Verificationposted by Sadie Martin on
Hi, we are working on getting the verbiage of the lease correct.
FTE calculation
NC-2009 PIf3:Occupant and Usage Dataposted by Stella Stella on
I have a project where the occupants work on a 12 hour shift. The office is occupied by 97 occupants at 1 shift. So is my FTE = 97 X 12/8 = 145.5? Thanks in advance.
Project has all 5 Categories
Schools-2009 WEc4:Process water use reductionposted by Sara Zoumbaris on
Hi all, My project has all 5 categories installed (dishwasher with racks, pre rinse etc..), however one of the products is above the maximum limit.
Designated Drop-off spaces
Schools-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Matthew Heaton on
Can all preferred parking spaces for low-emitting and fuel-efficient vehicles also be carpool drop off spaces.
The year of metering
EBOM-v4 EAp2:Minimum energy performanceposted by Vindio Corro on
Must be the year of metering after the registration of the project or can be used a year of metering of before?
Does all of Section 1.6 results have to be filled?
NC-2009 EAp2:Minimum Energy Performanceposted by Ivan Priatman on
Dear LEED, We are trying to achieve points in EAp2 scorecard via Building Simulation Method.
Duct sealing methods
NC-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by John Covello on
Hello, Can alternative methods for duct sealing be used besides plastic wrap? One of our contractors is proposing using foam to seal the end of the duct openings.