Hello, I have a question regarding below grade levels which have regularly occupied spaces If we refer to the excel sheet "HC Supplemental Daylight and Views Calculation Spreadsheet", it is specifi

We have a Garment factory project that has three blocks with connectivity bridge.  The three blocks are namely Cutting block, Sewing block, and Fabric store block.

We have project using an epoxy terrazzo poured floor where the VOC's for both components are 0 g/L. I understand that these would be listed in IEQc4.2 under floor coatings.

Recently an addenda was published to refer that "for projects that register after XX/XX/XX and are subject to the four point mandatory minimum, demonstrate an 18% improvement in the proposed buildi

My buildings roof is covered in solar panels that generate at least 20% of the building's annual energy.

I am having difficulty demonstrating compliance for Option C Occupancy Sensors.

Dear All We are currently working on a Major Renovation Building.

My project is a 93,000 sf open-plan hangar. We are designing grills on walls that count for 4% of the floor area on 2 opposite facades to induce crossed-ventilation.

I have a project with a commercial kitchen, so we're gathering info on all of the walk-in coolers, freezers, etc.

Hello, Was just wondering if someone could shed some light on the Refrigerant Charge and how I go about finding it? I am using R-410A as the refrigerant. Thanks.