Do factory applied paints need to comply with the VOC limits? Or only paints and coatings that are applied on-site?

After searching through the comments and the SCAQMD standard itself and not finding a similar request/answer, I would ask what standard would a bonding agent used to connect rebar to concrete would

Hello, I’m trying to evaluate the Air intake minimum separation distance in ASHRAE 62.1-2010 (table 5-1). Specifically the distance of the garage entry with all the openings.

Hello there, I have an issue with EPA energy star portfolio, not sure whether I can address in this forum. My project is in Dhaka,Bangladesh & it is a factory building.

We are utilizing LEED v2009 Retail NC for a major remodel/addition for a bank branch.

We have a very large existing facility registered under LEED-CI which will be partially renovated and partially updated.

My project is on a Campus that has used a District Heating and Cooling System and has achieved LEED ID credit in the past. They want me to use this as an ID credit for our CI project.

This is directly from the preliminary review report: 1. Bull Moose Tubing has been reported with a recycled content of 62.5% post-consumer and 37.5% pre-consumer.

In the proposed design an AHU is connected to a lot of zones. In that AHU there is a preheat coil. I have to model the baseline model as system 4 PSZ-HP.

We saw the CI Fees table and, since it caused so much impression about having a such small CI Retail and paying the same that a 50000sf project... we just want to make sure that this is it...