Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

ID Credit for Energy Star Appliances

NC-2009 IDc1:Innovation in Design
posted by  jim bell  on 

Our project was registered in fall, 2010 under NC 2009. We applied for an ID credit using energy star appliances with documentation complying with the ID credit catalog.

2
Director, Sustainable Design Solutions
HDR
LEEDuser Basic Member
25 thumbs up
Fri Jun 15, 2012, 8:47 pm

Innovation in Design - Alternative to Increased Ventilation

NC-2009 IDc1:Innovation in Design
posted by  Steve Leary  on 

What about active air cleaning in lieu of Increased Ventilation. Increased Ventilation only dilutes, but does not remove, VOC's, molds, etc.

3
Fri Jun 15, 2012, 8:37 pm

Carbon Offsets for LEED CI 2009 ID credit

CI-2009 IDc1:Innovation in Design
posted by  Michele Vernon  on 

Our project is currently pursuing LEED CI 2009 EA Credit 4 - Green Power. Would we also be eligible for an ID credit for carbon offsets based on a CIR for another rating system?

4
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Fri Jun 15, 2012, 6:09 pm

Process Load for CS

CS-2009 EAp2:Minimum Energy Performance
posted by  Yu Wang  on 

Hallo everyone, I have a question about process energy. My project is a mixed use for CS, contains office, laboratory, lobby, storage and corridor.

5
Mechanical Engineer
SCHOLZE Consulting GmbH
LEEDuser Basic Member
10 thumbs up
Fri Jun 15, 2012, 1:18 pm

flooring systems

NC-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems
posted by  Dario Ibarguengoitia  on 

Im confused, im not attempting IEQ Low-Emitting Materials-Adhesives and Sealants but i am attempting IEQ Flooring Systems. In this case, eventhough I am not attempting IEQ 4.1 in Flooring systems

3
Default Avatar
Sustainable Design And Construction Consultants, Paris, France
greenaffair
LEEDuser Basic Member
2 thumbs up
Thu Jun 14, 2012, 8:15 pm

pursuing SS4.3 via combination of Option 1 & Option 2

NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehicles
posted by  Bryan Waters  on 

I'd be interested to know if anyone has pursued this credit via a combination of Option 1 (preferred parking) and Option 2 (alt. fuel charging stations).

3
Default Avatar
Architectural Intern
WHR Architects
LEEDuser Basic Member
23 thumbs up
Thu Jun 14, 2012, 1:35 pm

High-Efficiency Toilets Don't Flush!!!

NC-2009 WEp1:Water Use Reduction—20% Reduction
posted by  Thomas McDermott  on 

We recently completed a new building where we used American Standard Cadet FloWise pressure-assisted 1.1 gpf toilets. The problem is that these toilets do not work properly.

3
Default Avatar
Senior Engineer
Summer Consultants, Inc.
LEEDuser Premium Member
8 thumbs up
Wed Jun 13, 2012, 8:47 pm

Disinfectants

EBOM-2009 IEQc3.3:Green Cleaning—Purchase of Sustainable Cleaning Products and Materials
posted by  Thomas McDermott  on 

Our cleaning company is proposing to use a "Enviro Solutions - Neutral Disinfectant Concentrate #256". First, I'm not even sure which standard/certification (i.e. GS-37) I should be looking for.

3
Designer
Architectural Visions, PLLC
LEEDuser Basic Member
2 thumbs up
Wed Jun 13, 2012, 3:50 pm

baseline HVAC system for Energy modelling

NC-2009 EAc1:Optimize Energy Performance
posted by  Grace Ming  on 

Hello All, We are now preparing the Energy modelling for one of our projects located outside USA. It is a 2 storey non-residential building with VRV system for cooling only.

5
Default Avatar
Senior ESD Consultant
LEEDuser Basic Member
62 thumbs up
Wed Jun 13, 2012, 2:05 pm

is Reach compliance equivalent to floor score?

CI-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems
posted by  Nandana Kumar  on 

Our client has proposed tarkett flooring products that meet REACH complaince standards. Can this be considered equivalent to floorscore?

2
Tue Jun 12, 2012, 11:45 pm